Automotive lifts have been designed with a variety of uses in mind. Some cars are smaller and elevators for smaller vehicles, ideal for small repairs and storage in home garages. Larger units for heavy-duty repair workshops have been created for professionals and other applications where they are constantly in use. Here are some models that can be considered.

Model car after Lifts

More commonly found in shops closed after two car lifts off the vehicles of various sizes and weights and only requires a small amount of space. This version comes in two styles. Asymmetric version has been made to facilitate access to the interior of the vehicle and it is better for vehicles with heavier rear. Symmetrical two-seat stand before the models of each other and have stabilizer bars in the opposite direction. The weight of the vehicle is centered on the computer.

Commonly found in showrooms and car shows, the four-post version is a better fit for heavy vehicles and storage. The additional posts on this style of lift add stability to the team. This style allows vehicles to drive up to, which makes them very suitable for use in comparison with the two styles later.

Parallelogram Styles

Parallelogram or scissor automotive lifts are best known for his ability to make space under a vehicle in private workshops. They are also more suitable for large vehicles such as the delivery framework of trucks and buses. These benefits come with a price, however. First, these models cost considerably more than four-post car lifts. They also require a large amount of space to use and are not recommended for storing vehicles.

Hydraulic Systems

This style is a favorite of many professional mechanics for the efforts undertaken by the job. The system includes a series of hydraulic fluid under pressure by a series of pumps and cylinders. This version has increased security in combination with the convenience of use.

Most of these car lifts use a combination of electricity and hydraulics and are one of the most common lifts seen in auto shops because the power is used to run hydraulics. They are quick to go up and down and have the power and stability needed for storage. Professional firms vehicle storage and the use of mechanical systems on a constant basis.

Land Styles & Mechanical Automotive Lists

Systems on the ground is a favorite of major repair of automobiles and other professionals who need space while working with these systems. The cars may remain in the lifts overnight if necessary, and with the elevator at ground level, is released as much space as possible. Businesses also use these systems, and to avoid having vehicles damaged due to lack of space. Unfortunately, this style of car lift also comes with a price to match.

Mechanical car lifts look very similar to the hydraulic style previously discussed under the hydraulic systems. Instead of liquid pumps and cylinders, mechanical systems use screws, padlocks, screws, wrenches and the suspension of a vehicle. Since these drives do not cost a lot more than hydraulic versions, this is a rare find in the automotive industry.

Auto Lifts for specific uses

Smaller shops that need to store more than one vehicle often used to save space elevator car. These will store a vehicle at the top and allow a second vehicle with mere inches below spare. Since the show floors and high-end cars will be seen above all show the elevators have a high aesthetic value. They are strong enough for storage of vehicles, but the finishes and features that complement the high end of the automotive market. Large commercial and display units come in different styles to meet the needs of the event. Most often, these automotive lifts are in large car dealers and professional car shows.

These are just some of the elevator car available to consumers. Some versions are specifically designed for storage, while others were created with industrial work in mind. Smaller workshops and car enthusiasts was not good. Car lifts have a variety of sizes, shapes and mechanical actions to suit every purpose.

• 0 Comments

Buying a stairlift is a major investment and the secondhand or reconditioned stairlift market is a perfectly legitimate one. Indeed, major manufacturers such as Stannah do offer secondhand stairlifts but would-be purchasers should be cautious about some unscrupulous dealers.

There can be problems when buying secondhand stairlifts. Straight rails can be safely re-used to install a second-hand straight stairlift but curved secondhand stairlifts always need new rails. This is because even if the carriage is secondhand, the rails have to be tailor-made to fit individual staircases because they must not obstruct doorways and must fit tightly to the stairs. Experts in the industry say it is just not possible to use secondhand curved rails safely.

Some people have purchased Stannah curved rails that have been re-manufactured from a number of old rails which have been cut up and welded together in an attempt to fit to a particular staircase. They are known in the industry as ‘cut and shuts’ – named after a similar practice in the secondhand car market.

Many customers have been misled into thinking they were buying genuine Stannah rails as advertisers have made no attempt to clarify the fact that the rails they are selling have been re-manufactured from a selection of old Stannah rails.

Due to the limitations of this re-manufacturing process, the quality and fit of the rails to the staircase is generally extremely poor and – most importantly – the stairlift could well be unsafe.

To be sure that you a receiving a brand new rail then you will need to go directly to Stannah or one of their approved dealers. Approved Stannah dealers all sign up to an agreement not to use cut and shut rails, giving the customer peace of mind that they are getting a brand new, and most importantly, a 100% safe rail.

It is also worth considering that companies that use cut and shut rails are not authorised dealers and therefore cannot buy spare parts from Stannah. This could seriously effect their ability to maintain and service your stair lift. This also means that their stair lift engineers have no training from Stannah.

If you have received a quotation from a company for a curved rail stair lift and they cannot prove that they are authorised dealers, then you should contact the manufacturer to see if they are on the approved list. If you think you have bought a stair lift that uses a cut and shut rail then you should contact the original manufacturer who can advise you what to do next.

• 0 Comments

• 0 Comments